| Model | Hantek6022BE |
| Channel | 2 Channels |
| Bandwidth | 20MHz |
| Input Impedance | 1MΩ 25pF |
| Max. Sample rate | 48MS/s |
| Coupling | AC/DC/GND |
| Vertical resolution | 8Bit |
| Gain range | 10mV-5V, 9Steps |
| DC accuracy | ±3% |
| Timebase range | 4ns-5ks |
| Vertical adjustable | Yes |
| Input protection | Diode clamping |
| X-Y | Yes |
| EXT. input | No |
| Trigger Mode | Auto, Normal and Single |
| Trigger Slope | +/- |
| Trigger level adjustable | Yes |
| Trigger Type | Rising edge, falling edge |
| Trigger Source | CH1, CH2 |
| Pre/Post trigger | 0-100% |
| Buffer size | 1M |
| Sampling selection | Yes |
| Waveform Display | port/line, waveform average, persistence, intensity |
| Network | Open/Close |
| Vertical mode | CH1, CH2, Dual, ADD |
| Cursor measurement | Yes |
| Math | FFT, addition, subtraction, multiplication, division. |
| Cursor | Frequency, Voltage |
| Accessories | S/W CD, probes, manual, USB cord |